I’m dying of stupidity, apparently.

I’m glad my tinkering could be of use to you!

I run my Deck as my primary computer and have been for about a year or so now. About 10 months without any Windows computer or alternative computer around. It’s been shugging and tugging away at all my projects where I do audio editing, gaming, voice chat, using my Sony camera as a webcam, editing sheet music through MuseScore, intensive web development and managing my servers.

There’s a lot that can be done with the Deck and I’m sure I’m in the 1% if not less of people using it as intensively as I am. I’ve made sure my Deck has a lock screen and has full disk encryption through LUKS as well which both is important to me since I work a lot on it when I’m away from home.

If you have any more thoughts regarding using the Deck as more of a PC I’ll happily share some tips and answer any questions!

I’ve actually done a tad bit of video editing on my Deck through Kdenlive and in short, it works.

I think a general issue is that Kdenlive tends to crash in of itself a bit. The biggest limitor is probably the lack of GPU based hardware exporting available for the Decks APU in Kdenlive. As well as the 16GB of RAM.

What I specifically did was load in a video file about an hours length, cut it down and overlay some recorded audio to it, sync it up and export. It was sluggish, froze every now and then and crashed a couple of times. RAM and CPU usage was continuously at high. If I remember correctly, the video was in 4K recorded on an iPhone in HDR. At least the source video was, I can’t recall if I scaled it down to 1080p or not.

I do want to mention that I’m not running SteamOS on my Deck however. I believe at the time I was running Bazzite and now I’m running Nobara. I haven’t tried doing this on SteamOS but I would imagine the experience would be more or less the same.

Will it work? Yes, kinda. Will it be as good as an experience as running it on a full fledged desktop with more RAM, higher end CPU and a somewhat modern dedicated GPU? No, it won’t. It’ll work in a pinch or if you have time and patience.

There is not. But I’d say keep SSH closed on the NAS or whitelist only your local IP in the firewall. I do that and turn it off when I don’t need it. It can be a bit risqué messing about with SSH on Synology because of how funky they’ve made the distro it’s running and any changes you make might not persist on reboot or after updates.

It’s basically a front-end GUI to Docker, like how some use Portainer. Synology has pretty alright documentation here. If you’re on mobile, click the menu button on the top right to view the sub-pages for the docs, was confusing at first to find what more it had to say about it lol.

But in short, to spin up individual containers you can go to the “Container” page. But there’s a big lack of control because Synology so I recommend to use Docker Compose under “Projects” for more fine grained control if needed. When you start a project you have to select a location for the project files and you can use dot notation for sub directory and files when doing volume mounting, eg. ./nginx/config:/etc/nginx/nginx.conf.

There’s a lot to read on for containers in general and working with them on Synology is a tad different and sometimes a lot of hoops to jump through. But it’s definitely nicer in the end than running almost anything outside of Synology’s Office Suite through it!

I’d recommend to make a Dockerfile for it and run it that way. It’ll be quite a lot easier than to manage installing a bunch of dependencies.

Here’s a guide I found pretty good!

Here’s a bit of a shorter one too to get some more reference.

I got a pre-order LCD Deck (256GB) from mid-October. While I don’t game too much on mine but mainly do desktop work, mostly server management and web development, it holds about 3 or 4 hours depending on how heavy the task is. When I play No Man’s Sky it’ll last about an hour.

I can’t see battery health as easily in GNOME tho. But I’m not complaining. This is while being plugged into a USB-C external 1080p OLED monitor and mouse and keyboard connected with Bluetooth.

For people wondering how the battery health is calculated, I’m guessing it’s what the factory max charge was in watt hours and how many it comparably holds now during max charge. That’s at least how I’ve seen battery health being calculated before!

I could see it function very well as an aid in moderation but not any type of solution like most things with AI is today.

In the case of Lemmy and other defederated social media platforms there’s going to be the usual cost hindrance and then the ethical side of it with excessive electricity usage and training data.

Disregarding that, as most know and everyone should know, AIs are not to be considered reliable or accurate ever. They will falsely flag and give false positives to potential comments and posts and images.

However, having an AI aggregate a list of potential bad comments and posts, then have a user manually checking the results, could help with moderation efficiency. Because how many users actually report comments and posts? How many do mods actually miss out on? There’s a lot of content and limited time.

removed by AI moderator

I plug my Behringer UMC404HD into the Deck using a hub adapter. Then I have my Sennheiser HD599 for audio and Shure SM57 for microphone. :-)

An entire spray bottle of Axe.

I’ve got the Keychron K7, it has low profile switches and keycaps and works pretty alright. Since I use my Deck as a dev machine and do my general computer stuff on it as well, In almost always bring it with me.

The downside to the K7 I’d say is the battery life. I often have it plugged in when at home and it lasts me when I’m out but the Bluetooth dies quickly on it when I forget to do so.

They have a re-programmable version of it as well and while I don’t have that one to save a bit of cash I’d wager it works a bit nicer.

There’s also different switches available to purchase. I have the keychron browns but hope to upgrade to the Gateron Banana or equivalent one day.

No, Njalla is. They have a history of stealing domains and banning users without explaining why and absolutely refuse to look into why a user got banned in the first place. On top of that generally terrible customer support.

I’ve had the complete opposite experience with 1984.hosting, support has been great and they even support GPG keys to one of their emails if you want to keep your inquires encrypted.

1984.hosting has a freely available to use DNS service for domains. They’re a good company that does what Njalla say they do but without the bullshit of stealing peoples domains.

Currently I’m playing through Ready Or Not, the engine update and them adding FSR3.0 made the game playable at the best of times! However the Deck still freezes and crashes occasionally sadly.

I started playing recorder in 2018 and have been practicing ever since, bought a couple different instruments after that and it’s been great. I joined a recorder ensemble too and we do local plays every now and then!

Since I started learning I learnt the alt recorder and tenor recorder too. Then I had a ukulele laying about I started to learn as well. I also bought a trumpet but learning that has been slow, I also got a Venova, kalimba, accordion and melodica laying about that I play on occasionally.

I think it’s a mix of finding the right instrument and inspiration to get a goal of. The only reason I started practicing recorder was because of this meme from VRChat

I wish I could upvote twice, you’re gonna save me so much time.

I grew up with the cheapest and most worn down vacuum cleaners. It was awful, everything from having to pull it out of a cabinet to finding an outlet and, having bad suction, awful cleaning heads and annoying hoses.

So when I got my own apartment and worked for a bit I decided to go all in on a Dyson Absolute V12 Detect. It’s actually very painless and super quick to vacuum now. Also a bit fun.

With a rechargeable battery it’s wireless and the battery lasts me about 4 vacuuming sessions in my apartment, no keeping track of vacuum bags and filters. All in all it takes me from touching my vacuum to being done cleaning my, albeit 1 room apartment, about 10 minutes. It’s great!

I’m thinking it’ll probably be way better for sustainability as well. Since I do need the performance I do and the Deck hits that performance within a good margin having to spend €12000 on a laptop with good build quality and good specs just for it to break or have some shit happen to it after the warranty is out feels like shit. So I’m thinking because the setup is semi-modular and each of the part of the setup isn’t super expensive it can still be worth it in the long-ish run. My steam deck break? I buy a new part from ifixit. The monitor breaks? Worst case scenario I can get a new one and possibly an upgrade since this market is new and moving. Keyboard and mouse breaks? Easy to replace that too.

Downside of course being the clunkiness of having to carry around all that and the time spent setting it up rather than just getting the laptop up and fold it up.

Something along the lines of 2K or more with at least good colour accuracy would suffice for me! It’s all I need for the photo editing part. Having plugged it into my 4K TV it went very well. All the UI elements and such displayed perfectly and smoothly for the most part. So 4K on the Steam Deck is most definitely doable! At least if you disregard gaming that is which isn’t the main goal for this project.

Does your steam deck output to 8K when you plug it into the TV? How are UI elements and FPS on that resolution for you? Would be fun to see where the limit would be.